Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
Removal
NOTE: Do not allow dust, dirt, or other foreign materials to enter the
steering gearbox.
Remove the steering gearbox.
Remove both tie-rod ends from the rack ends.
R ...
Installation (Part -1)
Before installing the steering gearbox, make sure that no grease is on
the mating surface of the steering gearbox and the front subframe. To
prevent the gearbox mounting bolts from looseni ...
Braking System
Your vehicle is equipped with front disc brakes. The brakes on the rear wheels
are drum. A power assist helps reduce the effort needed on the brake pedal. The
anti-lock brake system (ABS) helps yo ...
Categories
