Honda Fit manuals

Honda Fit: Interior Trim Removal/Installation - Cargo Area

Second generation (2007-2025) / Honda Fit 2007-2025 Repair Manual / Body / Body Interior / Interior Trim Removal/Installation - Cargo Area

Special Tools Required

NOTE:

  1. Release the hooks (A), then pull up the cargo floor (B) and remove it.

  2. Without spare tire

    ABAC

With spare tire

ABACCB???
  1. Release the bungee (C).

  1. Remove the tailgate weatherstrip, as needed.

  1. With temporary repair kit (TRK): Remove the cargo floor box (A)

  2. A
  1. Remove the rear trim panel (A).

    1. Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).

    1. Detach the clips by pulling the panel up.

  2. Fastener Locations: Clip, 4(Gray)DBCACB
  1. Install the trim in the reverse order of removal, and note these items:

    • If the clips are damaged or stress-whitened, replace them with new ones.

    • Push the clips, the hooks, and the tabs into place securely.

See also:

Maintenance Items Under the Hood
...

Ball Joint Boot Inspection/Replacement
Special Tools Required Bearing Driver Attachment, 40 mm 07GAF-SE00200 Check the ball joint boot for weakness, damage, cracks, and grease leaks. NOTE: If the ball joint boot is ...

Engine Oil/Air Separator Installation
Remove all of the old liquid gasket from the oil/air separator mating surfaces, the bolts, and the bolt holes. Clean and dry the oil/air separator mating surfaces. App ...

© 2025 Copyright www.hfitinfo.com