Honda Fit: Interior Trim Removal/Installation - Cargo Area
Special Tools Required
- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
-
Release the bungee (C).
-
Remove the tailgate weatherstrip, as needed.
-
With temporary repair kit (TRK): Remove the cargo floor box (A)
-
Remove the rear trim panel (A).
-
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
-
Detach the clips by pulling the panel up.
-
-
Install the trim in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips, the hooks, and the tabs into place securely.
-
See also:
Clutch Disassembly (A/T)
Special Tools Required
Clutch Spring Compressor Set 07LAE-PX40000
Remove the snap ring with a screwdriver.
Remove the clutch end-plate (A), the clutch discs (B) (6), the clu ...
Map Input
DEST button
►DEST Menu 2►Map Input
Use the joystick to manually select an icon or a location on the map screen
as the
destination.
You are prompted to define the map area to displ ...
Display and Volume Settings
INFO button
► Setup
Use the Main Setup screen to adjust the display and volume.
Select or
to adjust the desired
item.
The following items are available:
• Brightness: Adjusts the s ...
Categories
