Special Tools Required
*Available through the Honda Tool and Equipment Program; call 888-424-6857
NOTE:
Put on gloves to protect your hands.
Take care not to bend or scratch the trim and panels.
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
Release the hooks (A), then pull up the cargo floor (B) and remove it.
Without spare tire
With spare tire
Release the bungee (C).
Remove the tailgate weatherstrip, as needed.
With temporary repair kit (TRK): Remove the cargo floor box (A)
Remove the rear trim panel (A).
Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).
Detach the clips by pulling the panel up.
Install the trim in the reverse order of removal, and note these items:
If the clips are damaged or stress-whitened, replace them with new ones.
Push the clips, the hooks, and the tabs into place securely.
Audio Remote Controls
Steering Wheel Controls
Control basic audio system functions using the controls mounted on the
steering
wheel.
■MODE Button
Cycles through the audio modes as follows:
DISC mode appear ...
Canceling Your Route
1 Press the DEST button.
2 Select Cancel Route.
From the map screen:
1 Select MAP MENU.
2 Select Cancel Route.
...
Engine Block Drain Bolt/Sealing Bolt Installation
NOTE:
When installing the drain bolt (A), always use a new washer.
When installing the sealing bolt(s) (B), always use a new bolt(s) and
washer(s) (C).
...