Alternator Brush Inspection
Measure the length of both brushes (A) with a vernier caliper:
If either brush is shorter than the service limit, replace the brushes,
go to step
20.
If brush length ...
Dashboard Passenger's Tray Lid Removal/Installation
NOTE: Take care not to scratch the dashboard or its related parts.
Open the lid.
Remove the screws, then remove the passenger's upper tray lid (A).
...
Installation
Hold the gearbox housing using a C-clamp (A) and wooden blocks (B) to a
workbench as shown. Do not clamp the cylinder part of the gearbox housing in
a vise.
...