Honda Fit manuals

Honda Fit: EVAP Canister Vent Shut Valve Replacement

  1. Remove the EVAP canister assembly.

  1. Remove the hose (A), and disconnect the EVAP canister vent shut valve connector (B).

  1. Remove the EVAP canister vent shut valve (C) from the canister bracket (D).

  2. Install the parts in the reverse order of removal.

See also:

Clutch Pedal, Clutch Pedal Position Switch, and Clutch Interlock Switch Adjustment (M/T)
NOTE: For a cruise control problem, check the clutch pedal position switch. For a clutch interlock operation problem, check the clutch interlock switch. Remove the driver' ...

Stator Test
Check that there is continuity between each lead (A): If there is continuity, go to step 24. If there is no continuity, replace the stator. ...

Driveshaft Installatio
NOTE: Before starting installation, make sure the mating surfaces of the joint and the splined section are clean. Apply about 5 g (0.18 oz) moly 60 paste (P/N 08734-0001) to the contact ar ...

© 2021 Copyright www.hfitinfo.com