Honda Fit: Center Vent
NOTE: Take care not to scratch the dashboard or its related parts.
-
Remove these items:
-
Audio unit, without navigation system ('9-11 models)
-
Audio unit, without navigation system ('12-13 model)
-
Audio-navigation unit, with navigation system ('9-11 models)
-
Audio-navigation unit, with navigation system ('12-13 model)
-
-
Remove the screws, then remove the center vent panel (A) from the center panel (B).
-
Release the hooks (C), then remove the center vent (D) from the center vent panel.
-
Install the center vent in the reverse order of removal, and push the hooks into place securely.
See also:
A/T Differential Carrier Bearing Preload Inspection (A/T)
Special Tools Required
Driver Handle, 15 x 135L 07749-0010000
Bearing Driver Attachment, 72 x 75 mm 07746-0010600
Preload Inspection Tool 07HAJ-PK40201
NOTE: If the transmission housing, to ...
Driveshaft Installatio
NOTE: Before starting installation, make sure the mating surfaces of the
joint and the splined section are clean.
Apply about 5 g (0.18 oz) moly 60 paste (P/N 08734-0001) to the contact
ar ...
Shifter Input and Linkage
Paddle Shifter (Downshift Switch) Replacement (A/T)
SRS components are located in this area. Review the SRS component locations
and the precautions and procedures before doi ...
Categories
