Honda Fit: Wiper Arm Replacement
NOTE: Set the wiper arms to the auto-stop position before removal and installation.
Windshield
NOTE: Always pull up the driver's side wiper blade first.
-
Remove the caps, the nuts, and the wiper arms.
Rear Window
NOTE: Be careful not to damage the tailgate.
-
Remove the cover, the nut, and the wiper arm.
See also:
Mainshaft Disassembly, Inspection, and Reassembly (A/T)
Inspect the thrust needle bearings and the needle bearings for galling
and rough movement.
Inspect the splines for excessive wear and damage.
Check the shaft bearing s ...
Transmission End Crankshaft Oil Seal Installation - In Car
Special Tools Required
Driver Handle, 15 x 135L 07749-0010000
Oil Seal Driver Attachment, 96 mm 07ZAD-PNAA100
Remove the transmission.
M/T model
A/T model ...
Clutch Interlock Switch Replacement (M/T)
M/T model
Disconnect the 2P connector (A) from the clutch interlock switch.
Loosen the locknut (B), then remove the clutch interlock switch (C).
Install the clutch int ...
Categories
