U.S. Owners
Your new vehicle is covered by these warranties:
New Vehicle Limited -
covers your new vehicle, except for the battery, emissions control systems, and accessories against defects in materials and workmanship.
Emissions Control Systems Defects Warranty and Emissions PerformanceWarranty -
these two warranties cover your vehicle’s emissions control systems. Time, mileage, and coverage are conditional. Please read your warranty booklet for exact information.
Original Equipment Battery Limited Warranty -
this warranty gives up to 100 % credit toward a replacement battery.
Seat Belt Limited Warranty -
a seat belt that fails to function properly is covered by a limited warranty.
Please read your warranty booklet for details.
Rust Perforation Limited Warranty -
all exterior body panels are covered for rust-through from the inside for the specified time period with no mileage limit.
Accessory Limited Warranty -
Honda accessories are covered under this warranty. Time and mileage limits depend on the type of accessory and other factors. Please read your warranty booklet for details.
Replacement Parts Limited Warranty -
covers all Honda replacement parts against defects in materials and workmanship.
Replacement Battery Limited Warranty -
provides prorated coverage for a replacement battery purchased from your dealer.
Replacement Muffler Lifetime Limited Warranty -
provides coverage for as long as the purchaser of the muffler owns the vehicle.
Restrictions and exclusions apply to all these warranties. Please read the 2008 Honda warranty information booklet that came with your vehicle for precise information on warranty coverages. Your vehicle’s original tires are covered by their manufacturer. Tire warranty information is in a separate booklet
Canadian Owners
Please refer to the 2008 warranty manual that came with your vehicle.
Windshield Replacement
NOTE:
Put on gloves to protect your hands.
Wear eye protection while cutting the glass adhesive with a piano wire.
Use seat covers to avoid damaging any surface.
Glass a ...
A/T Countershaft Reverse Selector Hub Installation (A/T)
Special Tools Required
Driver Handle, 40 mm I.D. 07746-0030100
Install 1st gear, 2nd gear, 3rd gear, the 33.2 x 40 x 26 mm
collar, the 29 mm cotters, and the 33 x ...
Installation
Hold the gearbox housing using a C-clamp (A) and wooden blocks (B) to a
workbench as shown. Do not clamp the cylinder part of the gearbox housing in
a vise.
...