Valve Inspection
Remove the valves.
Measure the valve in these areas.
Intake Valve Dimensions
A Standard (New):
27.85пјЌ28.15 mm (1.0965пјЌ1.108 ...
System Theft Protection
The system is disabled when it is disconnected from the power source, such as
when
the battery is disconnected or goes dead.
■ Reactivating the system
1. Turn the ignition switch to ON (II) ...
Mainshaft Assembly Clearance Inspection (M/T)
NOTE: If replacement is required, always replace the synchro sleeve and the
synchro hub as a set.
Support the bearing inner race with an appropriate size socket (A), and
push down on the m ...