Honda Fit: Exterior Lighting

See also:

Alternator Reassembly
If you removed the pulley, put the rotor in the drive-end housing, then torque its locknut to 110 N·m (11.2 kgf·m,   81 lbf·ft). Remove any grease or any oil from the ...

Alternator Brush Inspection
Measure the length of both brushes (A) with a vernier caliper: If either brush is shorter than the service limit, replace the brushes, go to step 20. If brush length ...

Hood Opener Cable Replacement
NOTE: Put on gloves to protect your hands. Take care not to scratch the body or its related parts. Remove these items: Front grille cover Front ...