Honda Fit manuals

Honda Fit: Rear:

BC

The towing hooks can be used with a winch to pull the vehicle onto the flat-bed tow truck, and the tie down hook slots can be used to secure the vehicle to the flat-bed   tow truck.


Towing Hook Installation - The detachable towing hook is for towing very short distances, such as freeing the vehicle. The hook attaches to the anchor in the front or rear bumper.

  • To avoid damage to the vehicle, use the towing hook for straight flat ground towing only. Do not tow on an angle.

  • Do not use the detachable towing hook as a tie down to secure the vehicle to the flat-bed tow truck. Use the tie down hook slots provided.

  1. Remove the cover (A) from the bumper.

    • See also:

      Engine Compression Inspection
      NOTE: After the inspection, you must reset the ECM/PCM. Otherwise, the ECM/PCM will continue to stop the injectors from operating. Allow the engine to reach operating temperature (fan comes o ...

      Selecting iPod® Mode
      1. Connect the iPod® to the USB adapter cable in the center console. 2. Press the CD/AUX button until you get to iPod® mode. 3. Select AUDIO/STREET until AUDIO is highlighted in blue. ` ...

      Tailgate Lock Cylinder Replacement
      For Some Models NOTE: Put on gloves to protect your hands. Remove the tailgate lower trim panal. Disconnect the tailgate cylinder rod (A). NOTE: Check for damaged or stress-wh ...

    © 2026 Copyright www.hfitinfo.com