Honda Fit manuals

Honda Fit: Accessories

When installing accessories, check the following: • Do not install accessories on the windshield. They can obstruct your view and delay your reaction to driving conditions.

• Do not install accessories on the side pillars or across the side windows.

Accessories installed in these areas may interfere with proper operation of the side curtain airbags.

• Be sure electronic accessories do not overload electrical circuits or interfere with proper operation of your vehicle.

• Before installing any electronic accessory, have the installer contact a dealer for assistance. If possible, have a dealer inspect the final installation.

See also:

Dashboard Vent Removal/Installation
Side Vent Click here for an interactive version of this procedure (driver's, passenger's). NOTE: Take care not to scratch the dashboard or its related parts. Pull the upper portion ( ...

A/T Housing Reverse Idler Gear Installation (A/T)
Lightly coat the reverse idler gear shaft (A), the needle bearing (B), and new O-rings (C) with lithium grease. Assemble the new O-rings and the needle bearing on the reverse ...

A/T Differential Carrier Bearing Preload Inspection (A/T)
Special Tools Required Driver Handle, 15 x 135L 07749-0010000 Bearing Driver Attachment, 72 x 75 mm 07746-0010600 Preload Inspection Tool 07HAJ-PK40201 NOTE: If the transmission housing, torq ...

© 2026 Copyright www.hfitinfo.com