Honda Fit: Driving

See also:

Mainshaft Assembly Clearance Inspection (M/T)
NOTE: If replacement is required, always replace the synchro sleeve and the synchro hub as a set. Support the bearing inner race with an appropriate size socket (A), and push down on the m ...

EPS Control Unit Removal/Installation
Do the battery terminal disconnection procedure. Remove the under-dash fuse/relay box. Disconnect EPS control unit connector A (11P) and connector B (16P) by pus ...

Fastening a Seat Belt
After adjusting a front seat to the proper position, and while sitting upright and well back in the seat: 1. Pull the seat belt out slowly. 2. Insert the latch plate into the buckle, then tu ...