Honda Fit: Instrument Panel

See also:

Transmission Side - Release Bearing Removal
Remove the transmission. Remove the release fork boot (A) from the clutch housing (B). Squeeze the release fork set spring (C) with pliers to remove the release ...

USB Adapter Cable
1. Unclip the USB connector and loosen the adapter cable. 2. Install the iPod® dock connector or the USB flash drive to the USB connector. • Do not leave the iPod® or USB flash drive in the ...

Secondary HO2S Replacement
Special Tools Required O2 Sensor Wrench Snap-on S6176 or equivalent, commercially available Disconnect the secondary HO2S connector (A). Raise the vehicle on a lift. ...