Honda Fit manuals

Honda Fit: Front Seat Frame Replacement

Driver's Seat

Check the operation of the driver's seat position sensor after any of these actions   :

NOTE:

  1. Remove the front seat.

  1. Remove these items:

    • Front seat outer recline cover

    • Front seat inner recline cover

    • Front seat-back cover/pad

    • Front seat cushion cover/pad

    • Front seat outer recline inner cover

    • Front seat inner recline inner cover

    • Seat belt buckle

    • Side airbag

  1. Replace the front seat frame (A) with a new one.

  2. A
  3. Reassemble the driver's seat in the reverse order of disassembly, and reinstall it in the vehicle.


Passenger's Seat

Do the front passenger's weight sensor initialization after front passenger's seat frame replacement.

NOTE:

  1. Remove the front seat.

  1. Remove these items:

    • Front seat outer recline cover

    • Front seat inner recline cover

    • Front seat-back cover/pad

    • Front seat cushion cover/pad

    • Front seat outer recline inner cover

    • Front seat inner recline inner cover

    • ODS unit

    • Seat belt buckle

    • Side airbag

  1. Replace the front seat frame (A) with a new one.

  2. A

Bushing replacement

  1. If necessary, remove the bolts, and release the seat cushion springs (A) from the hooks (B), then remove the seat cushion frame (C).

  2. Fastener Locations: Bolt, 46 x 1.0 mm9.8 Nح (1.0 kgfح, 7.2 lbfئt)ABCBA
  3. Remove the seat weight sensors.

  1. If necessary, remove the bushings (A, B) from the seat cushion frame (C).

  2. B(White)A(Black)C
  1. Reassemble the passenger's seat in the reverse order of disassembly, and reinstall it in the vehicle.

See also:

Fuses
The vehicle’s fuses are contained in three fuse boxes. The interior fuse box is behind the driver’s coin tray. To access it, remove the tray by turning the dial counterclockwise then pulling ...

Countershaft Reassembly (M/T)
Exploded View Special Tools Required Driver Handle, 40 mm I.D. 07746-0030100 Bearing Driver Attachment, 25 mm I.D. 07746-0030200 Bearing Driver Attachment, 30 mm I.D. 07746-0030300 Bear ...

Fog Light Bulbs
When replacing, use the following bulbs. Fog Light: 55 W (H11) 1. Pry on the edge of the cover using a flat-tip screwdriver to remove the cover. ► Wrap the flat-tip screwdriver with a cl ...

© 2021 Copyright www.hfitinfo.com