Honda Fit: Passenger's Power Window Switch Replacement
NOTE: The illustration shows front passenger's power window switch.
-
Remove the door panel:
-
Front passenger's
-
Rear
-
-
Remove the screws and the grip base (A).
-
Open the switch panel (A) from the grip base.
-
Remove the screws and replace the passenger's power window switch (B).
-
Install the parts in the reverse order of removal.
See also:
Rotor Slip Ring Test
Measure the resistance between the slip rings (A):
If the resistance is within the standard, go to step
22.
If the resistance is not within the standard, replace the roto ...
MAF Sensor/IAT Sensor Replacement
Disconnect the MAF sensor/IAT sensor connector (A).
Remove the screws (B).
Remove the MAF sensor/IAT sensor (C).
Install the parts in the reverse order of removal ...
Throttle Body Removal/Installation
caution
Do not insert your fingers into the installed throttle body when you
turn the ignition switch to ON (II) or while the ignition switch is in
ON (II). If you d ...
Categories
