The system accepts these commands when a route is set.
How long to the destination?
How far to the destination?
Display destination map
Display entire route
ODS Unit Replacement
Removal
Do the battery terminal disconnection procedure,
then wait at least 3 minutes before starting work.
Disconnect the passenger's side airbag harness 2P connector. ...
Inspection
Install the flange nut on the damper shaft end, and set the socket wrench
and T-handle on the nut.
Compress the damper assembly by hand, and check for smooth operation
through ...
Removal
Raise and support the vehicle.
Remove the rear wheel.
Remove the wire guide grommet (A) from both sides of the axle beam.
@font-face ...