Clean all parts thoroughly in solvent, and dry them with compressed air. Blow out all passages.
Do not use a magnet to remove the check balls, it may magnetize the check balls.
Inspect the main valve body for scoring and damage.
Check all valves for free movement. If any fail to slide freely, refer to valve body repair.
Coat all parts with ATF during assembly.
VALVE SPRING SPECIFICATIONS
Valve Springs |
Standard (New)-Unit: mm (in) |
||||
Wire Diameter |
O.D. |
Free Length |
No. of Coils |
||
A |
Cut valve B spring |
0.8 (0.031) |
9.9 (0.390) |
27.3 (1.075) |
8.0 |
B |
Shift valve A spring |
0.8 (0.031) |
7.1 (0.280) |
23.7 (0.933) |
9.7 |
C |
Shift valve C spring |
0.8 (0.031) |
7.1 (0.280) |
23.7 (0.933) |
9.7 |
D |
Relief valve spring |
1.0 (0.039) |
9.6 (0.378) |
34.1 (1.343) |
10.2 |
E |
Lock-up control valve spring |
0.6 (0.024) |
7.1 (0.280) |
29.6 (1.165) |
11.2 |
F |
Cooler check valve spring |
0.85 (0.033) |
6.6 (0.260) |
27.0 (1.063) |
11.3 |
G |
Shift valve D spring |
0.8 (0.031) |
5.6 (0.220) |
28.1 (1.106) |
15.9 |
H |
Servo control valve spring |
0.8 (0.031) |
9.9 (0.390) |
27.3 (1.075) |
8.0 |
Fuse Locations
INTERIOR FUSE BOX
UNDER-HOOD FUSE BOXES
Primary Fuse Box
Secondary Fuse Box (On the battery)
...
Power Mirror Switch Test/Replacement
Remove the instrument panel.
Disconnect the 13P connector from the power mirror switch (A).
@font-face{font-family:
"Honda_SymbolMarkeng";src: ...
Brake/Clutch Fluid
Specified fluid: Honda Heavy Duty Brake Fluid DOT 3
Use the same fluid for both the brakes and clutch.
NOTICE
Brake fluid marked DOT 5 is not compatible with your
vehicle’s braking system and ca ...