Honda Fit: Transmission End Cover Selector Control Shaft Oil Seal Replacement (A/T)
Special Tools Required
- Driver Handle, 15 x 135L 07749-0010000
- Bearing Driver Attachment, 22 x 24 mm 07746-0010800
-
Remove the oil seal from the end cover.
-
Install the new oil seal flush with the end cover using the driver handle and the bearing driver attachment (22 x 24 mm).
See also:
Hood Opener Cable Replacement
NOTE:
Put on gloves to protect your hands.
Take care not to scratch the body or its related parts.
Remove these items:
Front grille cover
Front ...
Transmission End Cover Park Lever Stop Inspection and Adjustment (A/T)
Set the park lever in the P position.
Measure the center-to-center distance (A) between the park pawl shaft (B)
and the park lever roller pin (C).
Sta ...
Replacement (Part -1)
Remove some of the brake fluid from the master cylinder.
Raise and support the vehicle.
Remove the front wheels.
Remove the brake hose mounting bolt (A).
...
Categories
