Honda Fit: Transmission Unit
Second generation (2007-2026) / Honda Fit 2007-2026 Repair Manual / Powertrain / Transmission/Transaxle / Automatic / Transmission Unit
- A/T Countershaft Reverse Selector Hub Installation (A/T)
- A/T Secondary Shaft Sealing Ring Replacement (A/T)
- Transmission Housing Bearing Installation (A/T)
- Transmission Housing and Shaft Assembly Removal (A/T)
- VIN, Engine, (Motor), Transmission Numbers, and Paint Codes
- A/T System Description - Clutches and Gears (A/T)
- Clutch Wave-Plate Phase Difference Inspection (A/T)
- Transmission End Cover Selector Control Shaft Oil Seal Replacement (A/T)
- A/T Clutch Pressure Control Solenoid Valve B and C Replacement (A/T)
- Paddle Shifter (Downshift Switch) Replacement (A/T)
- Shift Solenoid Valve Removal and Installation (A/T)
- Servo Body Disassembly, Inspection, and Reassembly (A/T)
- Transmission End Cover Air Check Valve Inspection and Replacement (A/T)
- Main Valve Body Disassembly, Inspection, and Reassembly (A/T)
- Regulator Valve Body Disassembly, Inspection, and Reassembly (A/T)
- Valve Body and ATF Strainer Removal (A/T)
See also:
Transmission End Cover ATF Feed Pipe Replacement (A/T)
Remove the snap ring (A), the 3rd clutch feed pipe (B), and the feed pipe
flange (C) from the end cover (D).
Install a new O-ring (E) over the 3rd clutch feed pipe.
In ...
Wiper Blades
Check the condition of the wiper blades at least every six months.
Replace them if you find signs of cracking in the rubber, areas that are getting
hard, or if they leave streaks and unwiped areas ...
Installation
Install the damper rubber mount (A) onto the damper unit. Position the
damper assembly (B) between the body and the axle beam.
NOTE: Be careful not to damage the body.
...
Categories
© 2026 Copyright www.hfitinfo.com