Drain the automatic transmission fluid (ATF).
Install the ATF cooler hoses over the ATF cooler lines, and secure the hoses with the clips in the details (A), (B), (C), and (D), shown in the following figure. Keep the tabs of the clips clear of other parts.
Details |
Cooler hose end contacts to: |
Distance from hose end to clip |
A |
Bulge |
6пјЌ8 mm (0.24пјЌ0.31 in) |
B |
Bulge |
2пјЌ4 mm (0.08пјЌ0.16 in) |
C |
ATF filter housing (both sides) |
6пјЌ8 mm (0.24-0.31 in) |
D |
Bracket on the line |
6пјЌ8 mm (0.24пјЌ0.31 in) |
Refill the transmission with ATF.
Maintenance
...
Changing Your Destination
There are several methods you can use to change the route destination. ...
Routing & Guidance
INFO button
► Setup ►Other
►Routing & Guidance
Choose various settings that determine the navigation system functionality
during
route guidance.
Select an item.
The fo ...