Honda Fit: ATF Filter

See also:

Block and Piston Inspection
Remove the crankshaft and the pistons. Check the piston for distortion or cracks. Measure the piston skirt diameter (A) at a point 16 mm (0.63 in)   from ...

M/T Differential Backlash Inspection (M/T)
Place the differential assembly on V-blocks (A), and install the right driveshaft (B) and the left driveshaft (C). Measure the backlash of both pinion gears (D) with a dial in ...

Changing the Front Wiper Blade Rubber
1. Lift the driver side wiper arm first, then the passenger side. 2. Place a cloth on the edge of the lock tab. Push the lock tab up with a flat-tip screwdriver. 3. Slide the blade from the ...