Honda Fit: Tool Maintenance
Follow these instructions to keep the ATF cooler cleaner working properly:
-
Replace the two magnetic nonbypass spin-on filters after every 20 hours of use, based on the hour meter, or when you notice a restriction in the ATF flow.
-
Check the level and condition of the fluid in the tank before each use.
-
Replace the ATF in the tank when it looks dark or dirty.
See also:
Wheel Runout Inspection
Raise and support the vehicle.
Check for a bent or deformed wheel.
Set up the dial gauge as shown, and measure the axial runout by turning
the wheel.
...
Lower Front Bumper Grille Replacement
Special Tools Required
KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call 888-424-6857
With Front Fog Lights
NOTE:
Take care not to scratch ...
Front Door Glass Outer Weatherstrip Replacement
NOTE:
Put on gloves to protect your hands.
Take care not to scratch the door and related parts.
Lower the glass fully.
Remove the door sash outer trim.
...
Categories
