Honda Fit manuals

Honda Fit: Secondary Shaft 2nd Gear Axial Clearance Inspection (A/T)

  1. Install the thrust needle bearing (A), the needle bearing (B), 2nd gear (C), the thrust needle bearing (D), the 43 x 54.5 mm thrust washer (E), the 39 mm cotters (F), and the cotter retainer (G) on the secondary shaft (H), then secure them with the snap ring (I).

  1. Set the dial indicator (A) on 2nd gear (B).

  1. Lift 2nd gear (A) up while holding the secondary shaft (B), and use the dial indicator (C) to read the 2nd   gear axial clearance.

  1. Measure the 2nd gear axial clearance in at least three places while turning 2nd gear. Use the average as the actual clearance.

    Standard:

    0.04пјЌ0.12 mm (0.002пјЌ0.005 in)

  2. If the clearance is out of standard, remove the 43 x 54.5 mm   thrust washer and measure its thickness.

  3. Select and install a new thrust washer, then recheck.

    THRUST WASHER, 43 x 54.5 mm

    No.

    Thickness

    1

    2.900 mm (0.114 in)

    2

    2.925 mm (0.115 in)

    3

    2.950 mm (0.116 in)

    4

    2.975 mm (0.117 in)

    5

    3.000 mm (0.118 in)

    6

    3.025 mm (0.119 in)

    7

    3.050 mm (0.120 in)

    8

    3.075 mm (0.121 in)

    9

    3.100 mm (0.122 in)

    10

    3.125 mm (0.123 in)

    11

    3.150 mm (0.124 in)

    12

    3.175 mm (0.125 in)

    13

    3.200 mm (0.126 in)

  4. After replacing the thrust washer, make sure the clearance is within standard.

  5. Disassemble the installed parts from the secondary shaft.

See also:

AM/FM Radio Reception
Radio Frequencies The radio can receive the complete AM and FM bands. Those bands cover these frequencies: AM band: 530 to 1,710 kHz FM band: 87.7 to 107.9 MHz Radio stations on the AM band are a ...

Shift Solenoid Valve Removal and Installation (A/T)
NOTE: Do not hold the solenoid valve connector to remove and install the solenoid valve. Be sure to hold the solenoid valve body. Remove the mounting bolts, then remove the solenoid valves by ...

Navigation
This section describes how to enter a destination, select a route to take, and follow the route to your destination. It also describes how to change your route or destination along the way. ...

© 2024 Copyright www.hfitinfo.com