Honda Fit: A/T Differential Backlash Inspection (A/T)
-
Install the driveshaft and intermediate shaft into the differential assembly, and place the axles on V-blocks (A).
-
Measure the backlash of the pinion gears (B) with a dial indicator (C).
Standard:
0.05пјЌ0.15 mm (0.002пјЌ0.006 in)
-
If the backlash is out of standard, replace the differential carrier.
See also:
Rear Seat Control Cable Replacement
NOTE:
Take care not to tear or damage the seat covers.
Put on gloves to protect your hands.
Take care not to kink the cable.
The left rear seat is shown, the right rear ...
A/C System Evacuation (With A/C)
Special Tools Required
Compact Electronic Vacuum Gauge Robinair ROB14777, commercially available
*This tool is available through the Honda Tool and Equipment Program; call
888-424-6857
...
A/T Differential Carrier Bearing Preload Inspection (A/T)
Special Tools Required
Driver Handle, 15 x 135L 07749-0010000
Bearing Driver Attachment, 72 x 75 mm 07746-0010600
Preload Inspection Tool 07HAJ-PK40201
NOTE: If the transmission housing, torq ...
Categories
