Honda Fit: Transmission/Transaxle

See also:

Alternator Reassembly
If you removed the pulley, put the rotor in the drive-end housing, then torque its locknut to 110 N·m (11.2 kgf·m,   81 lbf·ft). Remove any grease or any oil from the ...

Air Cleaner Removal/Installation
Disconnect the MAF sensor/IAT sensor connector(A), then remove the air cleaner cover (B) and the air cleaner element (C). NOTE: Be careful not to damage the MAF sensor/IAT sensor on the air ...

Driver's Seat Position Sensor Operation Check
Check the driver's seat position sensor after the driver's seat position sensor replacement. Make sure the driver's seat is all the way forward position. Make sure the ...