Honda Fit: Park Pin Switch Replacement (A/T)
NOTE: The park pin switch is installed in the shift lever bracket base, and not available separately from the shift lever bracket base; replace the park pin switch and the shift lever bracket base as an assembly.
-
Remove the shift lever.
-
Disassemble the shift lever.
-
Replace the park pin switch and the shift lever bracket base assembly.
-
Assemble the shift lever.
-
Install the shift lever.
See also:
Pilot Bearing Replacement
Remove the crankshaft pilot bearing (A) using the remover weight (B), and
the 15 mm bearing remover shaft set (C).
Install a new pilot bearing (A) into the crankshaft using th ...
Selecting a Destination on the Map
Select a new destination when en route by selecting a location on the map.
1. Scroll the map to position the
cursor over your desired
destination, adjusting the map
scale as necessary. Press the ...
Front Seat Frame Replacement
Driver's Seat
Check the operation of the driver's seat position sensor after
any of these actions :
Driver's seat position sensor replacement
Cover plate (f ...
Categories
