Honda Fit manuals

Honda Fit: Accelerator Pedal Module Removal/Installation

  1. Remove the driver's dashboard lower cover.

  1. Disconnect the APP sensor connector (A).

  1. Remove the accelerator pedal module (B).

    NOTE:

    • The APP sensor is not available separately. Do not disassemble the accelerator pedal module.

    • If the accelerator pedal module is dropped, replace it.

  2. Install the parts in the reverse order of removal.

See also:

Flywheel Inspection
Remove the ring gear holder. Inspect the ring gear teeth for wear and damage. Inspect the clutch disc mating surface on the flywheel for wear, cracks, and burning. ...

Parking/Side Marker Light Bulbs
When replacing, use the following bulbs. Parking/Side Marker Light: 3.8 W (Amber) 1. Turn the socket to the left and remove it. 2. Remove the old bulb and insert a new bulb ...

Drive Belt Auto-Tensioner Pulley Replacement
Remove the auto-tensioner. Remove the tensioner pulley. Install the tensioner pulley in the reverse order of removal. Install the auto-tensioner. ...

© 2024 Copyright www.hfitinfo.com