Honda Fit: MAF Sensor/IAT Sensor Replacement
-
Disconnect the MAF sensor/IAT sensor connector (A).
-
Remove the screws (B).
-
Remove the MAF sensor/IAT sensor (C).
-
Install the parts in the reverse order of removal with a new gasket (D).
See also:
Front Brake Pad Inspection and Replacement
Special Tools Required
Brake Caliper Piston Compressor 07AAE-SEPA101
caution
Frequent inhalation of brake pad dust, regardless of material composition,
could be h ...
Installation (Part -1)
Before installing the steering gearbox, make sure that no grease is on
the mating surface of the steering gearbox and the front subframe. To
prevent the gearbox mounting bolts from looseni ...
PCV Valve Replacement
Remove the harness holder (A).
Disconnect the hose (A).
Remove the PCV valve (B).
Install the parts in the reverse order of removal with a new 14 mm washe ...
Categories
