Honda Fit: Valve Inspection
-
Remove the valves.
-
Measure the valve in these areas.
Intake Valve Dimensions
A Standard (New):
27.85пјЌ28.15 mm (1.0965пјЌ1.1083 in)
B Standard (New):
118.55пјЌ119.15 mm (4.6673пјЌ4.6909 in)
C Standard (New):
5.48пјЌ5.49 mm (0.2157пјЌ0.2161 in)
C Service Limit:
5.45 mm (0.2146 in)
Exhaust Valve Dimensions
A Standard (New):
22.85пјЌ23.15 mm (0.8996пјЌ0.9114 in)
B Standard (New):
117.25пјЌ117.85 mm (4.6161пјЌ4.6398 in)
C Standard (New):
5.45пјЌ5.46 mm (0.2146пјЌ0.2150 in)
C Service Limit:
5.42 mm (0.2134 in)
See also:
A/C System Inspection (With A/C)
NOTE: For A/C system noise,
go to the A/C System Noise Check.
Before troubleshooting any problem with the air conditioning system, other than
noise, do the following:
Check that the HVAC ai ...
Specifications
Dimensions
Weights
Seating Capacities
Engine
Capacities
*1: Excluding the oil remaining in the engine
*2: Including the coolant in the reserve tank and that remaining in the engine
...
Tailgate
All models except Canadian DX
The tailgate will lock or unlock when you lock or unlock the driver’s door by
using the key, the lock tab on the driver’s door, the master door lock switch or
th ...
Categories
