NOTE:
Identify each part as it is removed so that each item can be reinstalled in its original location.
Inspect the rocker arm shaft and the rocker arms.
If reused, the rocker arms must be installed in the their original locations.
Remove the rocker shaft bolt before removing the rocker shaft from the rocker shaft holder bridge.
Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points, the bearing surfaces, and lost motions.
When replacing the rocker arm assembly, remove the fastening hardware from the new rocker arm assembly.
Visiting Your Dealer
If you have a question that you cannot
resolve using the available help resources,
you can consult your dealer. Please identify
the specific issue (e.g., error occurs when
you enter a specific add ...
Intake Manifold Chamber Removal and Installation
Exploded View
Removal
Remove the under-cowl panel.
Remove the air cleaner.
Disconnect the engine wire harness connectors, and remove the wire
harness c ...
DOT Tire Quality Grading (U.S. Vehicles)
The tires on your vehicle meet all U.S. Federal Safety Requirements.
All tires are also graded for treadwear, traction, and temperature performance
according to Department of Transportation (DOT) s ...