Honda Fit: Engine Oil Filter Feed Pipe Replacement
-
Remove the filter.
-
Remove the oil filter feed pipe.
-
Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and hold one nut with a wrench, then tighten the other nut.
-
Apply new engine oil to the oil filter feed pipe threads, then torque the oil filter feed pipe to 39 NВ·m (4.0 kgfВ·m, 29 lbfВ·ft), then remove the nuts from the oil filter feed pipe.
-
Install the oil filter.
See also:
A/T Countershaft Reverse Selector Hub Installation (A/T)
Special Tools Required
Driver Handle, 40 mm I.D. 07746-0030100
Install 1st gear, 2nd gear, 3rd gear, the 33.2 x 40 x 26 mm
collar, the 29 mm cotters, and the 33 x ...
Opening and Closing the Windows
Opening/Closing the Power Windows
The power windows can be opened and closed when the ignition switch is in ON
, using the switches on the doors.
The driver’s side switches can be used to open
...
List of Categories
* Stored in “Fav. Subcategory” by factory default. ...
Categories
