Remove the under-cowl panel.
Disconnect the ignition coil connectors (A), then remove the ignition coils (B).
Remove the spark plugs, and inspect them.
Apply a small amount of anti-seize compound to the plug threads, and screw the plugs into the cylinder head, finger tight, then tighten the plugs to the specified torque.
Specified Torque |
18 NВ·m (1.8 kgfВ·m, 13 lbfВ·ft) |
Install all remaining parts in the reverse order of removal.
Identification Numbers
Your vehicle has several identifying numbers in various places.
The vehicle identification number (VIN) is the 17-digit number your dealer uses
to register your vehicle for warranty purposes. It is ...
Battery
WARNING
The battery gives off explosive hydrogen
gas during normal operation.
A spark or flame can cause the battery to
explode with enough force to kill or
seriously hurt you.
When conducti ...
Alternator Disassembly (Page -1)
Remove the four through bolts.
@font-face{font-family:
"Honda_SymbolMarkeng";src:url(/statics/ho_prod_2/txt/Honda_SymbolMark_enu3.txt);}@font-face{font-famil ...