Honda Fit: Fuel Tank Replacement
-
Drain the fuel tank until it is less than half full.
-
Reinstall the fuel tank unit without connecting the fuel tank unit 4P connector and the quick-connect fitting (feed line).
-
Raise the vehicle on a lift.
-
Remove the fuel tank guard (A), and the fuel tank protector (B).
-
Except LX (A/T model): Remove the fuel tank cover (A).
-
LX (A/T model): Remove the floor under cover assembly (A).
-
Remove the front floor cross beam (A), and the tank mount bracket (B).
-
Disconnect the fuel fill hose (A), and the quick-connect fitting (fuel suction tube) (B).
-
Disconnect the fuel tank vapor control valve hose (A).
-
Place a jack or other support under the fuel tank (A), then remove the strap bolts (B).
-
Remove the fuel tank.
-
Install the parts in the reverse order of removal.
NOTE: When you replacing the fuel tank with a new one, make sure you remove the ring pull upwards after you confirm the connection is secure.
See also:
Door Glass Adjustment
NOTE: Check the weatherstrips and glass run channel for damage or deterioration,
and replace them if necessary.
Place the vehicle on a firm, level surface.
Remove these items:
...
Steering Gearbox Removal and Installation
Special Tools Required
Ball Joint Thread Protector, 14 mm 071AF-S3VA000
Ball Joint Thread Protector, 10 mm 07AAF-SECA120
Universal Lifting Eyelet 07AAK-SNAA120
1.8 Support Bolt 07AAK-SNAA500 ...
Address
DEST button
► Address
Enter an address to use as the destination. The state or province you are
currently in
is displayed (e.g., California).
Select an item.
The following items are av ...
Categories
