Remove the fuel tank unit.
Using a hand pump, a hose, and a container suitable for fuel, draw the fuel from the fuel tank.
Reinstall the fuel tank unit.
Inspection
Install the nut on the damper shaft end, and set the socket wrench and
T-handle on the nut.
Compress the damper assembly by hand, and check for smooth operation
through a full ...
Washer Reservoir Replacement
Remove the front bumper.
Disconnect the 2P connector (A) and tubes (B) from the washer motor (C)
and the washer fluid level switch (Canada models).
...
Inboard Joint Side
Remove the boot bands. Be careful not to damage the boot.
If the boot band is welded type (A), cut the boot band.
If the boot band is a double loop type (B), lift up the ban ...