Check the fuel system lines and hoses for damage, leaks, and deterioration. Replace any damaged parts.
Check all clamps, and make sure they are properly positioned and tightened.
Replacement (Part -2)
Install the brake caliper piston compressor (A) on the caliper body (B).
@font-face{font-family:
"Honda_SymbolMarkeng";src:url(/statics/ho_prod_2/txt/Honda_S ...
Driver's Airbag Replacement
NOTE:
If replacing the driver's airbag after deployment, refer to
Component Replacement/Inspection After Deployment for a
complete list of other parts that must also be replaced.
...
Drive Belt Auto-Tensioner Inspection
Turn the ignition switch to ON (II), and make sure to turn the A/C switch
OFF, then turn the ignition switch to LOCK (0).
Check the position of the auto-tensioner indicator (A). S ...