Honda Fit: Connecting Rod Bolt Inspection
-
Measure the diameter of each connecting rod bolt at point A and point B with a micrometer.
-
Calculate the difference in diameter between point A and point B.
Point AпјЌPoint B = Difference in Diameter
Difference in Diameter
Specification:
0пјЌ0.05 mm (0пјЌ0.0020 in)
-
If the difference in diameter is out of tolerance, replace the connecting rod bolt.
See also:
Windshield Replacement
NOTE:
Put on gloves to protect your hands.
Wear eye protection while cutting the glass adhesive with a piano wire.
Use seat covers to avoid damaging any surface.
Glass a ...
Towing Your Vehicle Behind a Motorhome
Your vehicle can be towed behind a motorhome at legal highway speeds up to 65
mph (100 km/h). Do not exceed 65 mph (100 km/h).
Otherwise, severe transmission damage will occur.
When purchasing a t ...
Power Windows
Turn the ignition switch to the ON (II) position to raise or lower any window.
To open the window, push the switch down and hold it. Release the switch when you
want to stop the window. To close ...
Categories
