Raise the vehicle on the lift.
A/T model: Remove the shift cable cover.
Support the transmission with a transmission jack and a wood block under the transmission and raise it just enough to free the torque rod, then remove the torque rod.
M/T model
A/T model
Remove the torque rod bracket.
M/T model
A/T model
Install the torque rod bracket.
Install the torque rod (A).
NOTE: Be sure to install the torque rod with the UP'' mark facing up.
M/T model
A/T model
Install the bolt (B) with the tab (C) on the bolt head aligned with the guide (D) on the front subframe, then loosely install a new torque rod mounting bolt (E) and nut (F).
Remove the transmission jack and the wood block from under the transmission.
Tighten the torque rod mounting bolt and nut in the numbered sequence shown.
M/T model
A/T model
A/T model: Install the shift cable cover.
Removal
Raise and support the vehicle.
Remove the rear wheel.
Remove the wire guide grommet (A) from both sides of the axle beam.
@font-face ...
Protecting Children General Guidelines
Children depend on adults to protect them. However, despite their best intentions,
many adults do not know how to properly protect child passengers.
If you have children, or ever need to drive wi ...
Voice Help
This navigation system comes with voice help information, which tells you how
to use the voice command functions.
Go to Voice Info for tips when using the voice command functions. ...