Honda Fit: Engine Block
Second generation (2007-2025) / Honda Fit 2007-2025 Repair Manual / Powertrain / Engine / Engine Block
- Cylinder Head Cover Removal
- Engine Assembly Torque Rod Bracket Replacement
- Transmission End Crankshaft Oil Seal Installation - In Car
- Cylinder Block
- Cylinder Head
- Fuel System
- Ignition System
- Intake and Forced Induction
- Engine Lubrication
- Pulleys and Belts
- Starting System
- Valvetrain
See also:
Adding Engine Oil
1. Unscrew and remove the engine oil fill cap.
2. Add oil slowly.
3. Reinstall the engine oil fill cap, and tighten
it securely.
4. Wait for three minutes and recheck the
engine oil dipstick.
...
EPS Motor Removal and Installation
NOTE: Do not allow dust, dirt, or other foreign materials to enter the
steering gearbox.
Removal
Remove the steering gearbox.
Remove the EPS motor 3P connector (A) and the EPS ...
Emissions Testing
Testing of Readiness Codes
If you take your vehicle for an emissions test shortly after the battery has
been disconnected or gone dead, it may not pass the test.
This is because of certain ‘‘r ...
Categories
© 2025 Copyright www.hfitinfo.com