Honda Fit: EVAP Canister Replacement
-
Raise the vehicle on a lift.
-
Except LX (A/T model): Remove the fuel tank cover (A)
-
LX (A/T model): Remove the floor under cover assembly (A).
-
Remove the hoses (A), and disconnect the fuel subharness 6P connector (B).
-
Remove the bolts (A).
-
Remove the EVAP canister assembly (B).
-
Disconnect the FTP sensor connector (C), the hose (D), and the clips (E).
-
Disconnect the hose (A), remove the retainer (B) and remove the FTP sensor (C).
NOTE: When installing the FTP sensor, use a new O-ring (D).
-
Install the parts in the reverse order of removal.
See also:
Secondary HO2S Replacement
Special Tools Required
O2 Sensor Wrench Snap-on S6176 or equivalent, commercially available
Disconnect the secondary HO2S connector (A).
Raise the vehicle on a lift.
...
Playing Bluetooth® Audio
Your audio system allows you to listen to music tracks stored on your
Bluetoothcompatible
phone.
This function is available when the phone is linked to the vehicle’s Bluetooth®
HandsFreeLink ...
Ignition Switch Replacement
NOTE: SRS components are located in the area. Review the
SRS component locations, and
precautions and procedures before doing repairs or
servicing.
Do the battery terminal di ...
Categories
