SRS Component Replacement/Inspection After Deployment
NOTE:
Before doing any SRS repairs,
check for DTCs, for the less obvious deployed
components (seat belt tensioners, front impact sensors, side impact sensors,
etc).
If there is ...
Alternator Disassembly (Page -3)
Install a new front bearing in the drive-end housing with a hammer, the driver
handle, 15 x 135L (A), and the bearing driver attachment, 42 x 47 mm (B).
@fo ...
Front Seat-Back Cover/Pad Replacement (Part -1)
Special Tools Required
KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program; call
888-424-6857
SRS components are located in this area.
Review the SRS c ...