Place the differential assembly on V-blocks (A), and install the right driveshaft (B) and the left driveshaft (C).
Measure the backlash of both pinion gears (D) with a dial indicator (E). If the backlash is not within the standard, replace the differential carrier.
Standard (New): |
0.05-0.15 mm (0.0020-0.0059 in) |
Coordinate
DEST button
►DEST Menu 2►Coordinate
Specify a location using latitude and longitude map coordinates.
1. Enter the latitude. Select OK.
2. Enter the longitude. Select OK.
3. Scrol ...
Front Passenger's Airbag Replacement (Removal)
NOTE:
If replacing the front passenger's airbag after deployment,
refer to Component Replacement/Inspection After Deployment
for a complete list of other parts that must also be r ...
Brake Light, Taillight, Back-Up Light and Rear Turn
Signal Light Bulbs
When replacing, use the following bulbs.
Brake/Taillight: 21/5 W
Back-Up Light: 16 W
Rear Turn Signal Light: 21 W (Amber)
1. Pry on the edge of the cover using a flat-tip
screwdriver to remove ...