Honda Fit: A/T Differential Carrier and Final Driven Gear Replacement (A/T)
-
Remove the final driven gear (A) from the differential carrier (B). The final driven gear bolts have left-hand threads.
-
Install the final driven gear on the differential carrier in the direction shown.
-
Tighten the bolts to 101 N·m (10.3 kgf·m, 74.5 lbf·ft) in a crisscross pattern in at least two steps.
See also:
Manual Transmission Removal (M/T)
Special Tools Required
Universal Lifting Eyelet 07AAK-SNAA120
1.8 Support Bolt 07AAK-SNAA500
Engine Support Hanger, A and Reds AAR-T1256
*: Reds engine support hanger AAR-T1256 is available th ...
Emergency Towing
If your vehicle needs to be towed, call a professional towing service or organization.
Never tow your vehicle with just a rope or chain. It is very dangerous.
There are two ways to tow your vehicle ...
Tires
To safely operate your vehicle, your tires must be the proper type and size,
in good condition with adequate tread, and correctly inflated.
The following pages give more detailed information on how ...
Categories
