Honda Fit: A/T Differential Backlash Inspection (A/T)
-
Install the driveshaft and intermediate shaft into the differential assembly, and place the axles on V-blocks (A).
-
Measure the backlash of the pinion gears (B) with a dial indicator (C).
Standard:
0.05-0.15 mm (0.002-0.006 in)
-
If the backlash is out of standard, replace the differential carrier.
See also:
Home Addresses
INFO button
► Setup
►Personal Information►Home Address 1 or Home
Address 2
Set two home addresses that you frequently use.
1. Edit the name, address, and phone
number the s ...
Transmission Mount Replacement
Do the battery removal procedure.
Remove the air cleaner.
M/T model: Remove the battery cables (A) from the battery terminal fuse
box.
M/T mode ...
Changing the Pairing Code
PHONE button
► Phone Setup ► Add/Select a phone
1. Select Edit under Pairing Code.
2. Select an item.
The following items are available:
• Random: Uses a randomly generated pai ...
Categories
