|
|
NOTE:
If accidental system discharge occurs, ventilate the work area before resuming service.
Additional health and safety information may be obtained from the refrigerant and lubricant manufacturers.
Connect an R-134a refrigerant recovery/recycling/charging station (A) to the high-pressure service port (B) and the low-pressure service port (C), as shown, following the equipment manufacture's instructions.
Measure the amount of refrigerant oil removed from the A/C system after the recovery process is completed. Be sure to put the same amount of new refrigerant oil back into the A/C system before charging.
Guidance Prompts
INFO button
► Setup
Set the number of guidance prompts before you get to the guidance point.
Select an option.
The following options are available:
To replay voice guidance, select VOI ...
Fog Lights*
When the low beam headlights are on, turn
the fog light switch on to use the fog lights.
When the fog lights are on, the indicator in the
instrument panel will be on. ...
Adding Engine Oil
1. Unscrew and remove the engine oil fill cap.
2. Add oil slowly.
3. Reinstall the engine oil fill cap, and tighten
it securely.
4. Wait for three minutes and recheck the
engine oil dipstick.
...