Honda Fit: Recirculation Control Cable Adjustment
-
Open the glove box. Release the glove box stop on each side, then let the glove box hang down.
-
Set the recirculation control lever to FRESH ().
-
Detach the recirculation control cable housing from the clamp (A), and disconnect the inner cable (B) from the recirculation control linkage (C).
-
Turn the recirculation control linkage fully clockwise, and hold it. Attach the recirculation control cable to the recirculation control linkage, then install the recirculation control cable housing into the clamp.
-
If the recirculation control cable can't be adjusted to work properly, replace the cable:
-
Detach the cable from the recirculation control linkage.
-
Detach the cable from the recirculation control lever, and remove it.
-
Install the new cable in the reverse order of removal, then adjust the cable.
-
-
After installation, operate the controls to make sure they work properly.
See also:
Hood Adjustment
NOTE:
Put on gloves to protect your hands.
Take care not to scratch the hood, the body, or other related parts.
Remove the cowl cover.
Slightly loosen each bo ...
Front Passenger's Airbag Replacement (Removal)
NOTE:
If replacing the front passenger's airbag after deployment,
refer to Component Replacement/Inspection After Deployment
for a complete list of other parts that must also be r ...
Installation (Part -1)
Before installing the steering gearbox, make sure that no grease is on
the mating surface of the steering gearbox and the front subframe. To
prevent the gearbox mounting bolts from looseni ...
Categories
