
Pull the handle to open the glove box.
WARNING
An open glove box can cause serious injury
to your passenger in a crash, even if the
passenger is wearing the seat belt.
Always keep the glove boxes closed while driving.

Pull up on the lever to open the upper glove box.

■ Front seat beverage holders


■ Rear seat beverage holders
NOTICE
Spilled liquids can damage the upholstery, carpeting, and electrical components in the interior.
Be careful when you are using the beverage holders.
Hot liquid can scald you.

Pull up the strap and open the cargo area floor lid.
The accessory power socket can be used when the ignition switch is in
ACCESSORY
or ON
.

Open the cover to use it.
NOTICE
Do not insert an automotive type cigarette lighter element.
This can overheat the power socket.
The accessory power socket is designed to supply power for 12 volt DC accessories that are rated 120 watts or less (10 amps).
To prevent battery drain, only use the power socket with the engine running.

There is a coat hook on the rear left grab handle. Pull it down to use it.
The coat hook is not designed for large or heavy items.
Located at the back of the driver’s side rear seat cushion.

1. Fold up the driver’s side rear seat.
2. Turn the knobs to open the box. Align the dot marks on the knobs and the box cover when closing the box.

Use floor cargo hooks to secure luggage in the cargo area.

There are also hooks on both sides of the cargo area.
NOTICE
Do not hang a large object or an object that weighs more than 2.2 lbs (1 kg) on the side cargo hooks.
Hanging heavy or large objects may damage the hooks.
Center Vent
NOTE: Take care not to scratch the dashboard or its related parts.
Remove these items:
Audio unit, without navigation system
('9-11 models)
Audio unit, with ...
Audio Remote Controls
Steering Wheel Controls
Control basic audio system functions using the controls mounted on the
steering
wheel.
■MODE Button
Cycles through the audio modes as follows:
DISC mode appear ...
Installation
Install the damper rubber mount (A) onto the damper unit. Position the
damper assembly (B) between the body and the axle beam.
NOTE: Be careful not to damage the body.
...