Measure the resistance between the slip rings (A):
If the resistance is within the standard, go to step 22.
If the resistance is not within the standard, replace the rotor assembly.
Coil (rotor) resistance
Standard: |
2.1-2.3 ? at 68 °F (20 °C) |
Check for continuity between each slip ring and the rotor (B) and the rotor shaft (C):
If there is no continuity, replace the rear housing assembly, go to step 23.
If there is continuity, replace the rotor assembly.
Other Features
This section describes the useful functions incorporated into the
navigation system. ...
Front Seat Frame Replacement
Driver's Seat
Check the operation of the driver's seat position sensor after
any of these actions :
Driver's seat position sensor replacement
Cover plate (f ...
Carrying Cargo
Your vehicle has several convenient storage areas:
• Glove box
• Front door pockets
• Seat-back pocket
• Center pocket
• Cargo area side pocket
• Cargo area, including the rear sea ...