Honda Fit: Alternator Disassembly (Page -3)
-
Install a new front bearing in the drive-end housing with a hammer, the driver handle, 15 x 135L (A), and the bearing driver attachment, 42 x 47 mm (B).
-
Remove the stator (A).
-
Remove the terminal insulator (A) and the harness bracket (B).
-
Remove the voltage regulator/brush holder assembly (A) and the rectifier (B).
See also:
USB Flash Drive
...
Transmission Number
@font-face{font-family:
"Honda_SymbolMarkeng";src:url(/statics/ho_prod_2/txt/Honda_SymbolMark_enu3.txt);}@font-face{font-family:
"Honda_Sp ...
Starting the Engine
1. Apply the parking brake.
2. In cold weather, turn off all
electrical accessories to reduce the drain on the battery.
3. Manual transmission:
Press the clutch pedal down all the way. The START ( ...
Categories
